If you're like me, then you probably have issues with how low the US General tool box sits, especially with the hutch on top. I have hit my head on the hutch flip up door numerous times.

This spacer/riser block goes in between the caster wheels and the tool box. The default profile is for 50mm and requires the use of longer bolts. If you wish to have a different height, it is obviously quite easy to scale withing Bambu Studio.

The print settings are set up for speed and to lower the cost of filament. I have found that these settings are plenty strong enough in PLA. Feel free to change settings as desired.

*If you adjust the height of the spacers, the bolt length will obviously change as well. The original bolts are 20mm, so you will just have to add the thickness of the spacer and that will be your bolt length. Example: 45mm spacer + 20mm = 65mm bolt.