A vice cap that fits most bottlecap handles.

When you are painting a small part and need more grip, simply attach it to a cocktail stick and then insert the stick into the opening of the vice. You can tighten or untighten the vice with the provided nut and bolt.

Once the vice is fully tightened, the stick is not going anywhere and you can easily continue painting.

If you share this file or the printed file on the socials, please make sure to credit me.

UltiMaker

Ultimaker 2+ Connect

No

Yes

0.10 / 0/15 (recommended).

20% (50% or more for the bolt).

I recommend printing the vice and nut with 20% infill, and the bolt with 50% or more.

Once printed, the bolt and nut might need some sanding to fit properly, depending on the print quality and slicer settings.

Support is needed for the large part of the vice.