These are assembly jigs to help with the proper alignment of the frame during assembly of a CocoaPress v1.0.   Idea inspired by Adam at Vector3D's v0 assembly jigs which can be found here.

These are short prints < (10-20 minutes on my Voron 0 using overkill standard Voron part settings - 4 walls/5 tops/5 bottoms/40% cubic infill).  You may have to account for material shrinkage, for ASA I scaled the length by 0.5% in the slicer to achieve 75mm/25mm.

Hope this helps someone else in their build process!