When the door is fully opened it catches the edge of the window when it is opened to its stay limit, a bit of a design floor with our renovations.

Rather than get a fixed pain window I designed some new handles that only let the window open about 15mm. Based off the originals but with a larger tab most of the way around so that the window can't be pushed further open.

Used an M4x8mm heatsert and an M4x12mm countersunk screw to replace the stock M5 due to space constraints.

Printed in ASA with supports at 75% infill. The hole in the handle is to allow a screwdriver to fit through to fix the handle to the window. The redesign blocks access to the screw.