This is a self watering planter. It uses a reservoir and pot to give water to the plant. I designed this model on TinkerCAD using different shapes of different sizes. The link to the TinkerCAD model will be in the How I Designed This section.

MakerBot

MakerBot METHOD X

Yes

Yes

Normal or Best Resolution

100%

I used a Makerbot METHOD X printer, but it should be able to print on any printer. Use 100% infill for a complete seal, and use it for both the pot and reservoir.

I designed this 3D Model using TinkerCAD. The reservoir is a hollow cube body with a hollow rectangular shape inside of it. The rectangular shape is attached on the side to provide a hole to put water through. The pot is a smaller hollow cube body that perfectly fits within the reservoir. The pot has a cone and cylindrical mixed shape on the bottom that has holes in it. Those holes will provide the plant, which will be in the pot, water.

TinkerCAD Model Links:
https://www.tinkercad.com/things/1HHV3lVk8vN-self-watering-planter-reservoir
https://www.tinkercad.com/things/eOxVXqdCTEx-self-watering-planter-pot