Summary

This is the last part of my 3D printer enclosure, designed to contain a custom circuit board to power the Led strip in my enclosure. The board also has an LM2596 board to add a regulated DC output.
You will need an LM2596 board, some 2.54 2pin phoenix connector, a DC jack and two switch.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

Supports:

Yes

Resolution:

0.2mm

Infill:

20%

Filament: Sunlu PETG for base and ABS for cover Black and Grey

Notes:

Printed with skirt both part.

PETG 50% Fan 245°C Extruder 70°C Bed with Kapton and Hairspray
ABS 0% Fan 250°C Extruder 80°C Bed with Kapton and Hairspray

Etiketler

Çit

Model Kaynağı

Orijinal Link: Detayları Gör

CC BY

Summary

Print Settings

Etiketler

Model Kaynağı

İlgili Öneriler