Phoenix ashtray:

• It is suitable for personal use or for carrying around during travel
• Equipped with a sealed rubber groove
• Adopt a bayonet thread design

Print settings:

• Printing materials:ASA
• Extrusion rate:0.95
• Nozzle diameter:0.6 mm
• Floor height:0.2 mm
• Number of layers in the outer contour:3 layers
• Solid layer:Top: 6 floors, Bottom: 4 floors
• Fill density:35%
• Extension of the base side:4 mm
• Printing speed:30 mm/s
• Printing direction:Print according to the settings in the .stl file
• Supporting structure:Not enabled

Printing advantages:

• Heating chamber
• The temperature of the heating chamber is set to 45°C.

• Smooth PEI printing bed surface, treated with 3DLack
  
  

• If you don't have any of the above advantages, you can choose to useASA_anti-warping_trianglesMaterial, and turn on the precise alignment function in PrusaSlicer/Superslicer
  
  

Note: The Phoenix_Bottom model has a sealed rubber groove reserved at the end of the bayonet thread, which makes it easy to insert a sealed rubber band. Please use tweezers to securely embed the rubber band into the groove.

When used with rubber bands, it can achieve a full-range anti-odor sealing effect.