Hardware:

• 2 M3×6mm screws
• M3 hexagonal nuts × 2
• Art knife × 1

If conditions permit, it is recommended to use it.0.2mm nozzleMatchingArachneWall thickness slicing software.

The tightness of the rear screws can be freely adjusted according to needs; the tightness of the screws near the blade will directly affect the resistance when the blade swings outward.

When using the Rev2 version, you can easily replace the blade by simply unscrewing the screw near the blade. Then, remove the KnifeHolder component, replace the new blade, and reassemble it.