Mini Phone Tripod with a flexible clamp that will hold many phones with or without a phone case.
NO SUPPORTS are necessary to 3D Print... 3 Legs, 3 Pins, 1 Socket, 1 Ball, 1 Clamp... (9 pieces total)
This works best when printed 100% PETG (including pivot pins).
.125" roll pins may be substituted for the printed pins.
Ball is glued to the phone clamp with the triangular alignment pin and socket. (E6000 glue works well)
Make sure socket/base is WARM (90-110 Degrees F) when snapping ball into socket to prevent cracking... It is a permanent tension fit.