This is a spool holder that should work with a dollar store broom from China. Not all brooms will work but I took a couple measurements and this should work with a lot of stuff.

You may need a hack saw but it may also work without. I used a hack saw definitely.

EDIT: Just want to point out that even a four-reel setup like this on Amazon was forty dollars and sold out when I put this together. A lot of these things are specific to niche- if you understand the true value, you eliminate the thousands of steps I took to produce these models. There was a complete need for this thing I'm definite. When life gives you dollar stores, mold plastic.

https://www.amazon.com/OVERTURE-Filament-Consumables-Dimensional-Accuracy/dp/B07VBGWXM8?dchild=1&keywords=pink+PLA&qid=1635203118&qsid=134-3800753-6482538&sr=8-5&sres=B01EKEMD38,B072KXYKDP,B07VBGWXM8,B08HMHT9XT,B07VCBZ81Y,B07VFQWY42,B00MF03LAE,B0817WMRGH,B074T8TGL5,B07TY6FWJJ,B081S79YRX,B07X8FCSLZ,B00MEZDPS8,B07HXPZK5Y,B08PB5BMY9,B01IPM9ZTQ&srpt=THERMOPLASTIC_FILAMENT&linkCode=sl1&tag=girst-20&linkId=f609ae9ea9df6117ff477bd7b082a07a&language=en_US&ref_=as_li_ss_tl

Prusa

Prusa Clone

No

No

25%

Print with skirts/brim and make sure your bed is level. I didn't use heat, but do what you gotta do.