Cable guide for Creality Ender 3
Axis Y and Z

/!\ This is acctually made for the Ender 3 (classic), not the pro version /!\

Print the following files :

Z axis :

• 15x Segment
• 15x Cover
• 1x Up end Z
• 1x Down end Z
• 1x Down end cover Z
• (You will need two M4 nuts and bolts [with the flatest heads possible (Max : 3-4mm)] to fix the upper end to the extruder plate [the two holes are already made on the stock printer] )

Y axis :

• 10x Segment
• 10x Cover
• 1x Up end Y (this part way not adapt perfectly)
• 1x Down end Y
• 1x Down end cover Y

Assembly :

• Clip all the segments and ends together (except Z axis upper end)
• Slide the down ends in the printer's base 4040 profile
• Clip the Y axis upper end over the stock plastic part
• Remove the whole X axis to access the two holes on the extruder motor plate
• Bolt the Z axis upper end with the two M4 nuts and bolts
• Put back the X axis
• Clip the end of the Z segment chain to the Z upper end
• Carefully place the printers cable in the chains and put the covers on
• You're done !