Overview:

This design is for a 5" wide set of magnetically fixed vise soft jaws.

Revisions:

Initial Release - September 6, 2020

Details:

This 5 inch (127mm) wide soft jaws design includes several geometric features in order to clamp various objects in different orientations. Current design is sized to use a 0.78" X 0.20" (20 X 5mm) round magnet, which can be epoxied into place. The design also includes an undercut feature for the magnet location, to allow the epoxy to provide a mechanical bond to the jaws if printed in PETG.

Parts Needed:

• Filament :|
• Magnet
• Two Part Epoxy of your choice

Print Settings:

ABS

• Recommended: Not Ideal, but will work
• Perimeters: 3
• Infill: 30%
• Supports: No

PETG

• Recommended: Yes
• Perimeters: 4
• Infill: 50-70%
• Supports: No

PLA

• Recommended: No