Tank Prototype v1

I got inspired by a tank project ProtoTank and by FPV Prototank with Turret

I reused a lot from ProtoTank and motified the parts a bit so that e.g. nuts and screw heads disappear in them. I also modified the tank tracks so that they've got more grip.

Unfortunately the tracks are a bit loose but it works. Next time I will choose a small diameter for the track parts.

As first draft I use an arduino uno and a motor driver shield from Adeept like in the project radio-controlled-arduino-devices, especially from the vehicle 4WD Car based on Adeept Board. I used exactly the same software because also the 4WD car has got 4 TT-Motors and works the same way.

Part list:
1x simpleBaseFrame.stl (reused from tt-motor-mounting)
2x ProtoTank_trackinnerFrame2.stl
2x ProtoTank_TrackOuterFrame2.stl
64x stud.stl
64x track2.stl

All screws and nuts are changed to M3.

See details also on GitHub: https://github.com/grimmpp/tank-prototype