When printing large flat parts in ABS and PACF, I was having trouble with the corners of the steel sheet lifting off the bed due to the part curling, so I designed these clips to hold the bed down and prevent warping.

I recommend printing this in a very heat stable, stiff material like PACF or Fiberglass PA.

These parts are designed to print with no supports and should be printed in the orientation that the file opens in the slicer.

I have a double fan shroud on my machine, for fast, high flow printing, and these have enough clearance for my hotend, but I've not checked it with the stock fan shroud

Print Settings:

• PACF Filament Profile
• MK4 IS 0.6mm nozzle profile
• 0.20mm STRUCTURAL Profile
  • 5 Perimeters
  • 25% Infill
  • 6 Top and Bottom layers