Automag Key Mod rail
Eva Summers
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2026-01-28 15:47:00
0
0
000Açıklama
Model Kaynağı
Yorumlar(0)
For mounting on an AGD Automag.
4/10/20 - added variations for tighter fit to classic rail and for printing somewhat easier in vertical. KeyMod holes still need patching in the two vertically slotted versions.
5/4/20 - KeyMod holes patched on flat sided version. Rail was lowered on flat sided version.
12/22/20 - added a beefier flat sided version with tilted keymod rail to look around the feed neck.
Print Settings
Printer:
Makerfarm Prusa i3
Rafts:
No
Supports:
Yes
Resolution:
0.2 - 0.3
Infill:
50+
Filament:
E3D ABSBlack
Notes:
The ABS shrinkage may be a feature in this case. Print horizontal or vertical. Horizontal is easier cleanup.
Fitting
Holes are made to be tapped for 10-32 set screws. Use non-marring screws or use something in the holes to prevent marring the marker body. Bottom edges presently need some sanding to fit the classic rail, but keep rail contact to ensure stability.
Model Kaynağı
Orijinal Link: Detayları Gör
CC-BY