Vacuum attachment for CNC router. Uses either a 1 1/4 inch or 30mm hose end. Main section clamps around the 80mm spindle motor housing with #10 x 3/4 inch machine screws or 5 x 20mm screws. 1 1/4 inch Lock line from main section down to three different nozzle options. Also has optional top hose support (which I ended up not using). Lock line slides into channel on main section and is easily removable. I used 7 sections of lock line, main body in file has a heaver channel and more room to clear the hose than what is in the photos.

No

Yes

200

20