Summary

This is yet another ReprapDiscount LCD desk case. I assembled it with M3 and M5 screws by drilling the printed holes to 3.0mm and 5.0mm on one side and tapping the undrilled holes with M3 and M5 taps on the other, but you could use wood screws or whatever just as well. The plater has the suggested printing orientation and the other STL files are just whatever orientation they happened to be in the design. The cables are designed to go under the mount.

See photos for assembly hints.

Update: reprapdiscount-plate-3.stl includes the mount and has all three foot parts in correct orientation, unlike previous plates.