Buy a Buddy Cam for core one and set it up on your Sumo Enclosure for Prusa XL using existing hardware from the Sumo enclosure. 

You'll need:    Salex metal plates from amazon see part below (for the camera to magnetize to),   USBC cable,     and a USBC power block (5V).

 In photo you can see Im using a USBC Magnetic adapter from VAFOTON on Amazon.

***The buddy cam uses magnets to mount to the printer so you will need to order from amazon….copy description and paste in Amazon search (  Salex metal plates .4 x .8.  ). 

You will need to super glue it (metal plate) to the print because the 3m sticker will not stay stuck to the print. They only come in a pack of 32 so the extras can come in handy with other projects.

Print Upright with organic supports for best results. see the .3mf file.

Install on the Sumo Enclosure on the upper plexiglass corner midway between the printer and the top by replacing the corner bracket with the Buddy Cam Mount and use the hardware to reinstall.

You'll need to route your cable however it works best for you.