Saab tweeter mount

Print settings. 

PLA
20% Infill
Support on (I used tree support)
Nozzle temp 215°
Bed temp 50°

I used the DLS Reference RC25 and I think it can be used on many different tweeters.

You need to modify the ventilation pipe on the right side just a little, and I did it whit a heat gun, but it was only a small amount that was needed. I think you can do it whiteout the modification, but I want to make sure it's not in tension. I used hot glue to mount the tweeter in the mount and it worked well.

And I used the one whit 2,7mm holes but I did one whit 3.2mm if you what to use m3 screws whit nuts, I think that will work.   

I you have some question you can send me an email on jacobmorner07@gmail.com