Simple Aeropress Wall Mount
GoodlySpur
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2026-02-24 12:20:43
0
0
000Açıklama
Etiketler
Model Kaynağı
Yorumlar(0)
This will hold the two body-pieces of the Aeropress, as well as filters and the stir bar. The two back parts can be screwed and/or glued together (I used M3 screws). The arms should be a tight fit, but I might recommend gluing them in for good measure. I have this attached to the wall using some foam mounting tape, but Command strips could be used, also. Please print in the orientation provided for maximum strength. Please let me know if you run into any issues.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament: Inland PLA Light Blue
Notes:
Print 4 of the long arms, and two of the filter arms. Print everything else once. You might want to use a brim in case any of the parts wants to curl up when printing.
Etiketler
Model Kaynağı
Orijinal Link: Detayları Gör
CC-BY