Branden T., Josh B., and Ben D. designed this multi-part toy for a class project.

We printed successfully using the following settings:
Plastic: PLA
Infill: 25% (you might want to increase infill)
Shells: 2
Extruder Temp: 190
Bed Temp: 0

Support Required for:
BASEs.stl
SMALL_CENTER_PIECEx2s.stl

No support for other parts.

BLADEX4.stl must be printed 4 times.
SMALL_CENTER_PIECEx2s.stl must be printed 2 times.
All other parts require only one copy to be printed.

The top was designed with a tolerance of 0.2mm difference between firiction fit parts. Depending on the plastic used and your printer capabilities. some trimming may be required.