Nozzle holder (storage box)
GeorgeStone
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2026-04-08 13:45:23
0
0
000Açıklama
Model Kaynağı
Yorumlar(0)
This is a nozzle shaped box witch you can screw your E3D v6 nozzles in! The thread on the inside is m6x1 so your standerd E3D v6 nozzles fit perfectly. Its great to store al my nozzle's, there are 12 holes to screw you're nozzle's in.
Print guide:
Nozzle lid side: Flip the lid 180 degrees and print with no support. Brim is optional but I would suggest it due to the lack of adhesion on the bed.
Nozzle screw side: Only support on the bottom needed. I closed the holes of with one layer so the adhesion is beter. After the print its easy to remove with an exacto knive. Brim is optional.
Print instructions
Category: 3D Printer Accessories Summary
This is a nozzle shaped box witch you can screw your E3D v6 nozzles in! The thread on the inside is m6x1 so your standerd E3D v6 nozzles fit perfectly. Its great to store al my nozzle's, there are 12 holes to screw you're nozzle's in.
Print guide:
Nozzle lid side: Flip the lid 180 degrees and print with no support. Brim is optional but I would suggest it due to the lack of adhesion on the bed.
Nozzle screw side: Only support on the bottom needed. I closed the holes of with one layer so the adhesion is beter. After the print its easy to remove with an exacto knive. Brim is optional.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
Yes
</div>Resolution:0.15
Infill:
15%
</div>Filament:
Real Filament PLA Gold
Model Kaynağı
Orijinal Link: Detayları Gör
CC-BY