Wanhao/Maker Select Spool Holder
JauntyGlove33
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2026-03-03 08:29:46
0
0
000Açıklama
Etiketler
Model Kaynağı
Yorumlar(0)
I needed a better spool holder for my printer as the stock holder could nto fit a 1kg spool of prusament, The spool holder snaps into place on the metal frame and can easily hold a 1 kg spool.
There is a possibility to insert a small rod in the holder if you need to use spools that does not fit the holder, has not been tested.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
The higher the better
Filament: Generic PLA Your choice
Notes:
I've successfully printed this with a 0.8mm wall thickness and 20% infill, but I suggest printing with higher values for a sturdier holder, as the holder had a tendency to bounce when the extruder tugged on the filament. Latest settings that worked for me were 1.2mm wallthickness and 40% infill.rnrnBUT: if you want to put more weight on it, increase the infill and/or wall thickness
Etiketler
Model Kaynağı
Orijinal Link: Detayları Gör
CC-BY