Raspberry Pi Case with Board Mouting Holes
EarnestCrow
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2014-01-13 22:53:31
0
0
000Açıklama
Etiketler
Model Kaynağı
Yorumlar(0)
Summary
Just like the original but this one has two mounting holes for the revision B and onwards Raspberry Pi boards. The holes are 2.8mm in diameter which is sufficient for a M3 (3mm) bolt to self-tap a thread. I used two M3x8 hex headed bolts.
The holes on the Raspberry Pi are 2.9mm in diameter, I drilled mine out to 3mm carefully with a drill bit.
Etiketler
Model Kaynağı
Orijinal Link: Detayları Gör
CC BY