The case holds a Keto-Mojo Blood Glucose and Ketone Meter and it's accessories. It offers a few advantages over the original model:

• Removed slots for test strip calibration fluid.
• Enlarged storage for lancets.
• Storage pocket is secured with screws.
• Changed nearly all fillets to chamfers.

I find that I rarely use the calibration fluid and would prefer to have more room for lancets, so I made this change. 

I also changed the storage pocket to use a panel that is secured with screws and heat set inserts. This gives the storage pocket a somewhat refined look as well as the option to easily reconfigure the pocket in the future with new or different panels. 

To assemble the box you’ll need the following hardware:

• Qty 6: M3 x 30mm bolts. I used button head screws but cap head screws will also work.  These are used in the hinge and latch mechanisms.
• Qty: 10: M3 x 8mm flat head screws. These are used to secure the storage pocket panel. 
• Qty 10: M3 x 6mm Long x 5mm OD Heat Set Inserts

PETG is recommended for printing the box for strength and durability. I used 5 perimeters/walls and printed the box with a .20 layer height. Print as the models are placed.

The seal is optional, but if used, print in TPU or some other flexible filament.

Happy Printing!