Snowboard power plates. Used to lift your bindings off the board and give you more power to set an edge.
Please understand the use of these devices. You can damage your snowboard and/or get hurt by them. Not responsible for any damage to equipment and/or person.

Use long socket head screws to screw through the binding to the board. For the example here I used 40mm long M6 screws.

No

No

20%

Use ABS, PETG, or Nylon for good cold weather performance. Stay away from ASA and PLA.

Use 20% infill, triangles for best strength to weight ratio.

Walls and floor 0.8mm.