This is a replacement part consisting of bolt and handle for Thrustmaster Ferrari 458. I had to design it as I broke mine. I hope it will be useful to someone else too.

I haven't printed this design yet, but have printed the similar file with threaded rod 1" long in size just to check my design, and it worked best with the Ferrari 458 mount.

To make it stronger, I printed it horizontally (layers arranged length wise, one over another) in 2 halves, and joined them together with 5 minutes epoxy. If you print it vertical, then layers will arrange height wise and may get separated easily.

While dividing it in to two halves, I have reduced the thickness of both halves by 0.1mm to compensate for the glue in between.

I recommend printing the 3rd stl file (2 halves of the bolt) and join them with epoxy.

I have attached the picture of the 1" printed part, and the original metal screw to show you what part it is.

Ps. note: I have replaced an old bolt handle stl file with a new bolt handle stl file as previous design had no slot to insert the screw head in. Sorry if you have already downloaded the old version.

Thanks.

Tronxy P802MA

Doesn't Matter

No

0.2

35%

Remove the brim and attach 2 halves with 5 min quick epoxy.