This is a door stop. First I designed a block to stop the door from hitting the wall, a squash ball is used as a damper which is screwed into the wood through a hole in the block.
The second part I finished later, it is a stepping surface that blocks the open door, the blocking is unblocked by stepping on the stepping surface. You need to add a spring that lifts the stepping surface, it is a 7mm diameter spring with a length of 4cm but you can use any spring that will fit. Attention printed on voron 350 adjust the size according to yourself.

The 10mm rod is used for fixing into the ground

-0,2 layer height 

-print with support

- 5x wall loops

- print from ASA