The spool holder is preferably intended for insertion into a kitchen box with a width of 570 mm, but the width is limited only by the length of the metal rods. 7 classic spool can fit in the indicated width. Individual parts can easily be slid onto the rods to accommodate the width of the spools. According to the rods used and the weight of the spools, it is advisable to print one (or more) supports. The holder is completed with a rotating guide of the filament, which is fixed by clicking on the steel rods and a tag for marking the filament (paper card).

Unprinted parts:

• 2 x steel rod with a diameter of 8 mm (length according to the width of the space)
• 4 x ball bearing 608 (8 x 22 x 7) - for one spool
• 4 x 4 x 30 wood screws (in the case of fixing to the box)

Printing parts: 2 x steel rod holders

For one spool: 2 x filament holder (consists of right and left blocks that slide into each other - I recommend gluing) 1 x leash holder 1 x swivel leash 1 x tag (consists of 3 parts)

PLA, PETG filament is suitable for production. Layer height 0.3 mm (on the swivel guide 0.2 mm), infill 15%.

Category: 3D Printer Accessories