Parametric Cable Strain Relief Plate
Lucia Atkinson
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2025-12-08 17:28:28
0
0
000Açıklama
Model Kaynağı
Yorumlar(0)
About
A strain relief plate that cables can be fastened to using zip-ties. Various sizes are available and there is a parametric model for custom sizes (the number of cables can be adjusted).
The strain relief plate has mounting holes for M4 or M5 metric screws (e.g. ISO 4762).
Cables should be fastened using two zip-ties as shown in the images above.
Details
| Number of Cables | WIDTH | Mounting Holes | Hole Spacing |
|---|---|---|---|
| 3 | 40 mm | 1 | n/a |
| 4 | 55 mm | 2 | 25 mm |
| 6 | 85 mm | 2 | 55 mm |
| 8 | 115 mm | 2 | 85 mm |
| 12 | 175 mm | 3 | 70 mm |
| 16 | 235 mm | 4 | 65 mm |
Parametric Model
If you want a custom size, you can use the parametric FreeCAD model to create it. In the file, there is a Parameters table. There, you can set the number of cables (Count parameter) and optionally the number of mounting holes (Holes parameter).
Recommended Printing Parameters
| Orientation | Print with the top surface facing down |
|---|---|
| Support Material | Print without support material |
| Layer Height | 0.2 mm |
| Nozzle Diameter | 0.4 mm |
| Material | PETG |
Model Kaynağı
Orijinal Link: Detayları Gör
CC-BY-SA