Add switches to the factory blanked-off places on the dash/console area.

‘Loose’ and ‘snug’ refer to the hole for the switch, not for the plate to dash itself. Scaling up/down a few percent will help fitment in  that case if required - I designed these to be a tight enough fit that they wont fall out in operation, but I don't need a panel tool to remove by hand.

Designed specifically my 1995 Pajero/Montero, may work on other vehicles/vintages with the same style cover plate.

Switches used are: https://www.aliexpress.com/item/1005002834138915.html?spm=a2g0s.12269583.0.0.39085e97mSUN69

USB outlet: https://www.aliexpress.com/item/32707826783.html?spm=a2g0s.12269583.0.0.10dc46c0ag3FQ7