3D printed brackets to mount some cheap weather station sensors. The sensors I got were from Maplin in the UK.

I used the following sensors:
Anemometer
Wind vane
Rain gauge
Vertical pole

16mm dia Aluminium tube from B&Q

I used the 16mm Aluminium tube for the horizontal tube and the Mapline 20mm dia tube for the vertical post.

I designed and 3D printed the following brackets.

• Mounting bracket the the Anemometer
• Mounting Bracket for the Wind Vane
• Mounting bracket for the rain sensor
• Base bracket to support the vertical post
• Bracket to connect the horizontal and vertical post

Velleman K8200

No

No

0.3mm

30%