A Jeep logo keychain designed in Oneshape. 
Print time is more or less around 22m at 0.20 layer heigh (0.4 mm nozzle).
Print time is more or less around 24m at 0.16 layer heigh (0.4 mm nozzle).

Dimension: 37 mm diameter and 3 mm height

Print parameters:

• Layer height - 0.20 mm
• Perimeters - 3
• Infill - 10% is sufficient
• Brim - NO 
• Support - NO
• Raft - NO
• Filament type - PLA or any

Could be printed even in multicolor without MMU, AMS or similar.

For multicolor print:

When printing at 0.2 layer height: put the printer in Color Change mode(G-code M600) at layer 14 and then change filament
When printing at 0.16 layer height: put the printer in Color Change mode(G-code M600) at layer 16 and then change filament.

P.S.: If you need changes just write to me, I'll be happy to help you for free. Thank you!