This is the second themed version of my original moveable figure. The figure reuses a lot of the parts from the original model with only the head and legs being different. To avoid duplicate models I have only included the different STLs in the individual STLs section. I have however included the complete part STLs to save having to download from two separate models. A unique feature to this model are the short version of the legs. These legs are compatible with all other model versions so I look forward to these being used with other models. The head has only been tested at full scale and was printed on my Prusa Mk3S with MMU2S. However you should be able to print the features separately to the head and press fit them together.

Additional notes:

The swivel hips from the skeleton figure are also compatible with this model if you would like an extra motion element. To add designs to the body you can just use the modifiers in Prusa slicer and carry out manual filament swaps. Some example .3MFs of this are available in the original file.

Print instructions:

All files have been printed and tested using various brands and colours of PLA/PLA+ on my Prusa Mk4, Prusa Mk3S with MMU2S and my frankenstein 180x180mm bed slinger with the following settings:

• Nozzle size 0.4mm
• Layer height 0.2mm
• 2 perimeters

I haven't found any other setting to affect the fit and function of the assemblies however for the head it is beneficial to observe where the seam placement will end up in the slice preview. the head to neck fit is dependent on your extrusion multiplier calibration. The default settings for both of my Prusa's provide the desired fit.

Assembly instructions:

Please refer to the assembly instructions in the original model.