!!!! This part dosn't work with a BLTouch on the left side. !!!!

My case for the ender 2 with mod https://www.thingiverse.com/thing:2522480 .

If you like you will found the gcode-file here (onedrive): https://1drv.ms/u/s!AiCJNWePxhMthfl9WR4m-zoalhIDJQ
!!!Importand note!!!!! Please change your XYZ offset on line 203 !!!!! I'm not using the internal parameters.
You use the gcode for your own risk.
gcode is made by simlyfy3D.

temperature extruder: layer 1 (210°C) and up to layer 3 (195°C)
temperature bed: layer 1 (70°C) and up to layer 3 (60°C)
fan: layer 1 to 4 (0%) up to layer 5 (75%)
printing speed: 50mm/sec
support: manually on the switch holes (see the last screenshot)
!!no raft!! (if you like the gcode with raft? Let me know!)

my startscript:
M92 X79.8614 Y79.2395 Z399.0247
G28 ; home all axes
G1 Z5 F3000 ; lift
G1 X8 Y10 F1500 ; move to prime
G1 Z0.2 F3000 ; get ready to prime
G92 E0 ; reset extrusion distance
G1 Y80 E10 F600 ; prime nozzle
G1 Y100 F5000 ; quick wipe

my endscript:
G28 X0 ; home x axis
M106 S0 ; turn off cooling fan
M104 S0 ; turn off extruder
M140 S0 ; turn off bed
M84 ; disable motors

Ender 2

Doesn't Matter

Doesn't Matter

0.15

100%

I had issues on the back side by printing without support but it's okay for me. It's your choice to print with support.