Winnie the Pooh style Hunny Pot, was designed as a (large) pencil pot for a fan, but could also be used as a plant pot or just decorative.

There is a gap for a weight in the bottom, I used a 100mm diameter 6mm thick mild steel plate off ebay which gives it really good stability.

I've added the Fusion 360 file as well as STL files for the pot with and without the 'hunny', be aware that the Fusion 360 file is without the 'hunny' as I had to resize the space for the weight and this was easier on the file with just the pot. If you want the Hunny but need to remove or resize the weighted bit, I did it by cutting mesh for STL with 'hunny' in half in Fusion 360 and then merging it with mesh for just the pot (make changes to object then convert to mesh). There's probably a better way but I don't know it sorry!

Creality

Ender 3

No

No

0.2

40

Took about 2 days to print at 50mm/s, paused using Cura plugin to add weight in and taped over weight to allow print to adhere better on next layer.

Sanded, primed and painted with acrylics then sprayed with sealer. Forgot to photograph before sorry!

Fusion 360 for pot, the 'hunny' was done with blender.