Our mixer got dropped on its beater, and gluing it back together broke pretty quickly, so I decided to re-model it.

I've seen this mixer branded as a Barbie Mixer and a My Home Mixer.

I modeled this part with the following in mind:

• The stick part that goes into the mixer gets printed at the bottom
• It requires a brim around the bottom due to the small surface area
• It requires supports (organic is fine) for the circles where the stick separates from the beater part

In my latest print, I printed it with .8mm wide extrusion widths out of a .6mm nozzle. It required some post-processing to smooth out the sides, but the nice wide extrusions seem to be providing some extra strength.

I'm including the Fusion 360 files as there seems to be several mixers with the same general design but maybe slightly different properties. I haven't re-imported it, but hopefully the sketch dimensions can be edited from the history timeline.