A set of 10 nameplates for Modular 004 with labels added:

• M3x6/8
• M3x10/12
• M3x16/18
• M3x20/25
• M3x30
• M3x35
• M3x40
• M3 Nuts
• M5x12
• M5 3030 T-Nuts

The labels are centered horizontally and are 1mm above center vertically (to account for part of the bottom being covered by the nameplate slot). You'll get better text resolution with a 0.25mm nozzle, but as you can see from the photo, they're perfectly legible when printed with a 0.40mm one.

No supports or brim should be needed, but be sure to let everything cool on the plate to prevent any warping during cooling.

If you would like to make changes or use these labels as a starting point for your own, the Tinkercad project can be copied from here: https://www.tinkercad.com/things/9m3FwjVlLgq