Simple Light Stick Holder/Stand - Parametric
Cedric Percy
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2026-01-11 22:10:11
0
0
000Açıklama
Model Kaynağı
Yorumlar(0)
This design is a simple light stick holder with adjustable parameters to suit different light sticks.
Use Fusion 360 to change the parameters by going to Modify > Change Parameter.
My Print Settings:
- PLA+ Jayo Black
- 0.2mm layer height
- 0.4mm nozzle
- 2 Wall Loops
- 15% Cross Hatch Infill
- No Brim
- No supports
Tested Measurements:
| User Parameter | Description | BTS | SKZ | BTS Mini |
|---|---|---|---|---|
| base_diameter | diameter of bottom plate | 100 | 100 | 50 |
| base_height | height of bottom plate | 5 | 5 | 2 |
| holder_bottom_diameter | measure the diameter for the bottom of the light stick | 29.5 | 30 | 16 |
| holder_top_diameter | measure the diameter from the middle of the light stick based on holder height | 31.5 | 32 | 16 |
| holder_height | measure up the light stick on how far you want the holder to go | 60 | 60 | 30 |
| holder_thickness | how thick you want the holder part to be | 6 | 6 | 2 |
| holder_filet_size | how round you want the opening to be | 3 | 3 | 1 |
| holder_slot_width | slot with for key chain or lanyard | 3 | 3 | 3 |
Model Kaynağı
Orijinal Link: Detayları Gör
CC-BY