Buy me a coffee on Patreon: https://www.patreon.com/romanscanBuy me a coffee on Patreon: https://www.patreon.com/romanscan

Bring dark fantasy to life with The Witch’s Flight – Paintable Miniature.
This detailed model features a grotesque witch with a crooked nose and torn cape, flying on her broomstick while a swarm of cursed hands rise from below to grasp her. Perfect for painters, collectors, and 3D printing hobbyists, this figure captures gothic horror in every detail. Print it, paint it, and let the witch take flight on your shelf.Bring dark fantasy to life with The Witch’s Flight – Paintable Miniature.
This detailed model features a grotesque witch with a crooked nose and torn cape, flying on her broomstick while a swarm of cursed hands rise from below to grasp her. Perfect for painters, collectors, and 3D printing hobbyists, this figure captures gothic horror in every detail. Print it, paint it, and let the witch take flight on your shelf.

Recommended Print Settings

🖨 FDM (PLA/ABS) Printing:

Layer Height: 0.12 – 0.16 mm (for high detail)

Infill: 15–20% (Gyroid or Grid recommended)

Nozzle Size: 0.4 mm (smaller nozzles, like 0.25 mm, give sharper details but longer print times)

Supports: Required (especially under the broomstick and hands)

Print Speed: 40–50 mm/s for best detail

Temperature (PLA): 200–210 °C nozzle, 65–70 °C bed

Orientation: Print upright on the base for stability

💎 Resin (SLA/DLP) Printing:

Layer Height: 0.03 – 0.05 mm for maximum detail

Supports: Light/Medium supports, especially under cape edges and broom

Exposure: Standard resin settings (check resin manufacturer’s guide)

Wash & Cure: IPA wash + UV cure for 3–5 mins

Result: Ultra-sharp details, smooth finish – perfect for painting

🎨 Post-Processing:

FDM: Sand lightly, then apply primer before painting.

Resin: Just prime and paint – details pop naturally.

Buy me a coffee on Patreon: https://www.patreon.com/romanscanBuy me a coffee on Patreon: https://www.patreon.com/romanscan