I needed to separate things in the IKEA Samla 22l box. I found the 3D model of the box, so it was a matter of a few minutes.

Print instructions:

• Material: PETG
• Layer: 0,2 mm
• Perimeters: 2
• Infill: 15
• Supports: No
• Brim: No

This model does not require any special settings, more details in the attached 3MF file.

Assembly instructions:

Unfortunately, IKEA Samla boxes have a relatively large manufacturing tolerance range. If you want to be sure of the functionality of my model, first print a test template on paper, stick it on cardboard and try it in your box. PDF file is included.

Custom modification:

If you want to modify the model, I am attaching the STEP file and a link to my OnShape.

OnShape Link

Unfortunately, this model with its dimensions will not fit on the printing plate of my Prusa MK4. Therefore, I have also prepared a version divided into two parts with an admitted division. Both parts need to be glued, I used my favourite two-component epoxy glue.

And of course, for owners of 3D printers with a larger print plate, a one-piece version is also available 😉.

Current model version:

• Standard Version: V01
• Two Part Version: V01

Note:

Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.

Print visions, create reality!