A simple test cube. The lettering is exactly centered and 1.2mm wide, the small corners are 0.4mm and the large ones 1.2mm. Indention is 0.4mm (1 nozzle/4 0.1mm layers).

Hollow version with 1.2mm walls also available, turning the Z-top also into a bridging test.

An Easy version with a 0.2mm phase in the lettering and a very easy version with a 0.4mm phase in the lettering also available.

August2020 Update:

A resin version was added. Since I had lost the original files, I had to re-design it, but took the same measurements. 1.2 mm lettering of 0.6 mm depth, 1.2 mm, walls, and a pair of resin-escape holes in the Z-cover, and a little air intake hole on the X sides to prevent cupping.

Category: 3D Printing Tests