This is the OpenScad version of my housing for a mouse trap (so that birds do not become victims when the trap is in the garden). See https://www.thingiverse.com/thing:6261521 . It is tailor-made for the "SuperCat" mouse trap made by Swiss Inno.

It has a Customizer thus CHECK the APPS in the above menu !!
Select the item you want: housing, lid or housing + lid . Depending on print settings and the used filament you may need more or less accuracy (clearance between the sliding lid and housing). This may result in printing the lid twice.

Its an exercise with OpenScad . First prints are running to verify the trap and lid fit.
15-10-2023:First result: the trap fits but the entrance requires a larger minimum value (20) for the length. Otherwise a small part of the trap is outside. Updated in the script.
17-10-2023: Update of the sliding lid which was not 100% symmetrical. Updated the script and .stl files.
18-10-2023: Edge depends on wall thickness. Code changes wrt magic numbers and constants.
09-11-2023: Added HG mouse trap and WindHagen Snap

My Printer

No

No

0.3

60%

Z Seam alignment = RANDOM !!
Brim = 8mm