Fuji lens base cap
NutmegWater98
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2017-01-09 01:52:05
0
0
000Açıklama
Model Kaynağı
Yorumlar(0)
Summary
This is a lens base cap for Fuji XF lenses (XPro, XT-1, XT-2 etc). It fits snug by friction and differs from the OEM caps in that it does not turn to lock on. Some fitting may be required post printing.
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Simple Metal
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100
Notes:
Printed in PLA at 100% infill. You could reduce the infill for a faster print
Post-Printing
This is designed to fit snug with no turn to lock it onto the lens. Some post processing sanding or fitting may be required depending on how well calibrated your printer is. This pretty much fit my Fuji lenses after printing and is held in place by friction.
Its for folks who have lost lens base caps or need extras.
How I Designed This
Designed in 123D Design to match Fuji lens base cap specs (measured with micrometer).
Model Kaynağı
Orijinal Link: Detayları Gör
CC BY