Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.09x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA smartfil dark grey Transmission Distance: 0.8PLA smatfil amarillo Transmission Distance: 5.8PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments

Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to dark greyAt layer #13 (1.12mm) swap to amarilloAt layer #20 (1.68mm) swap to Jade White for the rest.