This mod allows you to mount the CEB pcb to the back of your printer and hide your CanBus cable management neatly in a pretty box.

It goes nicely with another model I've made that allows you to route the cables via the back filter:

• Voron 2.4 Multi-Tool Exhaust Cover with PUG and ECAS

BOM

• M3x6 - 9x bolts
• M3x12 - 2x bolts
• M3 - 2x t-nuts to mount to the top extrusion
• M3 Heatset Inserts 9x Voron Standart (M3x4x5 — 4mm length, 5mm outer diameter)

Installation

Simply melt in all heat inserts, then mount the bracket to the extrusion with M3x12 bolts.

Then insert two cable ties to hold wires securely, but don't close them yet

After that you can attach the CEB to the base and then the base itself to the bracket.

Then do all your wiring, after whick you can securely lock the zip-ties.

Don't forget to check all the connection with the multimeter.

When everything is done, you can attach the lid.