IF YOU LIKE IT, LEAVE ME A LIKE AND A COMMENT WITH THE PHOTO OF THE PRINT, IT WOULD HELP ME A LOT TO KNOW IF YOU LIKE IT...

It can be printed with any 3D printer.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 150.06x150.06mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

PLA Generic Recicled Black Transmission Distance: 0.3

PLA Generic Recicled Gris claro Transmission Distance: 1.5

PLA Generic Recicled White Transmission Distance: 5

PLA BambuLab Basic BambuLab Green Transmission Distance: 2

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Gris claro

At layer #10 (0.88mm) swap to White

At layer #14 (1.2mm) swap to BambuLab Green for the rest.