Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Overture Black Transmission Distance: 0.5
PLA Overture Cement Gray Transmission Distance: 4
PLA Overture Light Gray Transmission Distance: 3.5
PLA Overture Red Transmission Distance: 4
PLA Jessie Mystery Orange Transmission Distance: 7
PLA Prusament Pineapple Yellow Transmission Distance: 8

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cement Gray
At layer #11 (0.96mm) swap to Light Gray
At layer #14 (1.2mm) swap to Red
At layer #15 (1.28mm) swap to Mystery Orange
At layer #20 (1.68mm) swap to Pineapple Yellow for the rest.