Scalable Articulated Arm

Designed for multiple uses: headphone stand, small camera holder, desk lamp support, or any other light accessory.
All parts are optimized to be 3D printed and easily assembled using the printed screws.

The design is modular, so you can add more arm segments and adjust the length to your needs.

👉 If you find any issue or possible improvement, feel free to let me know.

This design is open-source. If you make an improvement or a remix, share it 🙌

Printing Instructions

Orientation: print the parts flat on the bed for better strength.

Infill: 30% or higher

Walls/Perimeters: minimum 3.

Supports: only where needed (mainly on horizontal holes).

Material: PLA or PETG (for more strength).

Notes

You can scale the parts in Cura/PrusaSlicer to fit your setup.

The design is optimized in millimeters (mm).

For better load capacity, print in PETG or ABS.