Background

I made the very popular Circular Sock Machine (available on this site) but had no experience actually knitting. I started trying to make socks but realized I didn't have a latch hook. I was using the latching knitting machine needles temporarily but needed something more convenient.

Print Settings

Tested with PLA but PETG/ABS/ASA should be OK. Tolerances are made for FDM, so if you print using resin, the needle may be a little too loose.

0.4mm nozzle

0.2mm layer height

Brim recommended but I was successful printing without it

Assembly

Simply insert an uncut machine knitting machine needle into the holder. Apply a dab of glue to help keep it firmly in place. It should be press fit and a little tight.

I did not test with a cut needle as I was worried it would fall out easily.

Parts Requied

• 1 Knitting machine needle (KR850 needle, available on Amazon/Aliexpress)
• Printed part